#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#
# DPW-8/AePW-4 SPECTRAL CONTENT SUBMITTAL FORM (Version 6 - February 10, 2025)
#
# Data Set Title XXX.YY: Replace "XXX.YY" in the zone titles with the following information
# (Three-Digit Participant ID).(Two-Digit Submission ID)
# XXX THREE-DIGIT PARTICIPANT ID: assigned by your working group leaders
# YY TWO-DIGIT SUBMISSION ID: (self assigned) label a solver/grid/computational approach
# EXAMPLE: 007.02
#
# NOMENCLATURE:
# FREQ: Frequency (Hz)
# PSD: Pressure power spectral content
#
for ONERA OAT15A and for JAXA CRMWB/CRMWBNP
#
# DEFINITIONS: CTU --> Convective Time Unit (Uinf/Cref is 1.00 CTU)
#
# REFERENCE VALUES: ONERA OAT15A (ONE CELL WIDE)
# Planform ref area, A = Cref * span (span is grid dependent)
# Mean aerodynamic chord, Cref = 230.00 mm
# x moment center = 57.50 mm
# y moment center = 0.00 mm
# z moment center = 0.00 mm
#
# REFERENCE VALUES: Common Research Model
# Planform ref area, A = 594720.00 inches^2
# Mean aerodynamic chord, Cref = 275.80 inches
# Full-span length, B = 2313.50 inches
# Semi-span length, BO2 = 1156.75 inches
# x moment center = 1325.90 inches
# y moment center = 0.00 inches
# z moment center = 177.95 inches
# Aspect Ratio, AR = 9.00
#
# CONFIGURATION: ONERA OAT15A
# JAXA CRMWB (Common Research Model Wing/Body)
# JAXA CRMWBNP (Common Research Model Wing/Body/Nacelle/Pylon)
#
# DATA LOCATIONS: ONERA OAT15A: provide spectral content at x/c=0.45 (Kulite 7)
# JAXA CRMWB/CRMWBNP: x/c=0.3040 (section E, eta=0.5) and x/c=0.7903 (section E, eta=0.5).
# x/c=0.3097 (section F, eta=0.6) and x/c=0.7677 (section F, eta=0.6).
# Refer to https://cfdws.chofu.jaxa.jp/apc/dpw/upc.html
#
# NOTES: 1. All numerical data fields can be free-formatted.
# 2. Please use at least 4 decimal places for coordinate values
# 3. Please use at least 6 decimal places for coefficient values
# 4. Only include one grid type, grid size, soln method, turb model, etc per form.
# 5. Fill fields with value of -999 for data that are not available.
#
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
TITLE = "XXX.YY"
# Column 1 2
VARIABLES = "FREQ" "PSD"
#---------------------------------------------------
# PARTICIPANT, GRID, AND SOLVER INFORMATION
#---------------------------------------------------
DATASETAUXDATA ParticipantID = "Participant ID"
DATASETAUXDATA SubmissionDate = "Date of Submission"
DATASETAUXDATA Name = "Name of Participant"
DATASETAUXDATA Email = "Email Address of Participant"
DATASETAUXDATA Institution = "Name of your company/organization"
DATASETAUXDATA SolverName = "Solver name used and version number"
DATASETAUXDATA BasicAlgorithm = "RANS, URANS, DES, DDES, WMLES, etc."
DATASETAUXDATA TurbulenceModel = "SA, SA-RC, SA-la, SST, SST-2003, Wilcox1998k-w, EARSMko2005, etc."
DATASETAUXDATA GridId = "Multiblock, Overset, Hex, Hybrid, Prism, Custom, etc."
DATASETAUXDATA Notes = "Any thing else you would like to add"
ZONE T="XXX.YY - ALPHA ZZZ - x/c = ???"
AUXDATA GridLevel = "1, 2, 3, 4, 5, or 6"
AUXDATA Mach = "?.????"
AUXDATA Re = "??"
AUXDATA Alpha = "?.????"
AUXDATA x/c = "Streamwise data location"
AUXDATA Section = "Spanwise section (omit if one-cell wide calculations)"
AUXDATA Dt = "Time step per iteration (optional)"
AUXDATA CtuStart = "Convective Time Unit at Which Averaging Started"
AUXDATA CtuAvg = "Number of Convective Time Units in Time-Averaging Phase"
AUXDATA GridFileName = "File name(s) of the grid(s) you used"
???.???? ???.????
ZONE T="XXX.YY - ALPHA ZZZ - x/c = ???"
AUXDATA GridLevel = "1, 2, 3, 4, 5, or 6"
AUXDATA Mach = "?.????"
AUXDATA Re = "??"
AUXDATA Alpha = "?.????"
AUXDATA x/c = "Streamwise data location"
AUXDATA Section = "Spanwise section (omit if one-cell wide calculations)"
AUXDATA Dt = "Time step per iteration (optional)"
AUXDATA CtuStart = "Convective Time Unit at Which Averaging Started"
AUXDATA CtuAvg = "Number of Convective Time Units in Time-Averaging Phase"
AUXDATA GridFileName = "File name(s) of the grid(s) you used"
???.???? ???.????
ZONE T="XXX.YY - ALPHA ZZZ - x/c = ???"
AUXDATA GridLevel = "1, 2, 3, 4, 5, or 6"
AUXDATA Mach = "?.????"
AUXDATA Re = "??"
AUXDATA Alpha = "?.????"
AUXDATA x/c = "Streamwise data location"
AUXDATA Section = "Spanwise section (omit if one-cell wide calculations)"
AUXDATA Dt = "Time step per iteration (optional)"
AUXDATA CtuStart = "Convective Time Unit at Which Averaging Started"
AUXDATA CtuAvg = "Number of Convective Time Units in Time-Averaging Phase"
AUXDATA GridFileName = "File name(s) of the grid(s) you used"
???.???? ???.????