5th AIAA CFD Drag Prediction Workshop

DPW 5 Geometries

Reference for Common Research Model geometry: AIAA 2008-6919.pdf, 5 MB

CAD Models of Common Research Model

Reference Area, S = 594,720.0 in2
Reference Chord, c = 275.80 in
Reference Span, b = 2,313.50 in
Moment Reference (X,Y,Z) = (1,325.90, 468.75, 177.95) in

IGES Files (November 7, 2008):

Wing-Body-No Tail: DPW4_wb_no_tail_v03.igs.gz

Wing-Body-Tail, i_H = 0 : DPW4_wbt_ih+0_v03.igs.gz

Wing-Body-Tail, i_H = +2 : DPW4_wbt_ih+2_v03.igs.gz

Wing-Body-Tail, i_H = -2 : DPW4_wbt_ih-2_v03.igs.gz

Notes on IGES geometry files:

These files have been compressed with gzip.
CADFIX: The current release of CADFIX does not show the center section of the fuselage above the wing.
Gridtool: By default, Gridtool only turns on trimmed surfaces. The center section of the fuselage above the wing is not trimmed and does not show by default. To show this section, go to the surface panel, select all (instead of single), select "off" and select "wireframe".

NASA Official Responsible for Content

Joseph H. Morrison

Last Updated
10 December 2011

Feedback on Langley Products and Services
Accessibility